802.1x Commands
show dot1x
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 529
36
e3 Auto Unauthorized Ena 3600 Clark
e4 Force-auth Authorized Dis 3600 n/a
e5 Force-auth Unauthorized* Dis 3600 n/a
* Port is down or not present.
Console# show dot1x ethernet e3
802.1x is enabled.
Port Admin Mode Oper Mode Reauth Reauth Username
Control Period
---- ---------- --------- ------- ------ --------
e3 Auto Unauthorized Ena 3600 Clark
Quiet period:60 Seconds
Tx period:30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 08:19:17
MAC Address: 00:08:78:32:98:78
Authentication Method: Remote
Termination Cause: Supplicant logoff
Authenticator State Machine
State: HELD
Backend State Machine
State: IDLE
Authentication success: 9
Authentication fails: 1
The following table describes the significant fields shown in the display.
To Next Page
Loading...
