LACP Commands
show lacp port-channel
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 241
17
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays LACP information about port-channel 1.
Console# show lacp port-channel 1
Port-Channel ch1
Port Type Gigabit Ethernet
Attached Lag id:
Actor
System Priority: 1
MAC Address: 00:02:85:0E:1C:00
Admin Key: 1000
Oper Key: 1000
Partner
System Priority: 0
MAC Address: 00:00:00:00:00:00
Oper Key: 14
To Next Page
Loading...
