Introduction
Accessing the Command Line Interface
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 27
1
Figure 8 Command Prompt
STEP 3 The
Command Line Interface
will be displayed. Enter admin at the
User Name
prompt and press Enter.
Figure 9 Command Line User Name Prompt
STEP 4 The console# prompt is displayed. This prompt is where you enter CLI commands.
Figure 10 Command Line
You can now enter CLI commands to manage the Switch. For detailed information
on CLI commands, refer to the appropriate chapter(s) of this Reference Guide.
To Next Page
Loading...
