Spanning Tree Commands
show spanning-tree
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 402
28
Console# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: long
###### MST 0 Vlans Mapped: 1-9, 21-4094
CST Root ID Priority 32768
Address 00:01:42:97:e0:00
Path Cost 20000
Root Port 1 (e1)
Hello Time 2 sec Max Age 20 sec
Forward Delay 15 sec
IST Master ID Priority 32768
Address 00:02:4b:19:7a:00
Path Cost 10000
Rem hops 19
Bridge ID Priority 32768
Address 00:02:4b:29:7a:00
Hello Time 2 sec Max Age 20 sec
Forward Delay 15 sec
Max hops 20
Console# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: long
###### MST 0 Vlans Mapped: 1-9, 21-4094
CST Root IDPriority 32768
Address 00:01:42:97:e0:00
This switch is root for CST and IST master.
Root Port 1 (e1)
Hello Time 2 sec Max Age 20 secForward Delay 15 sec
Max hops 20
To Next Page
Loading...
