User Interface Commands
do
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 475
33
Console# show history
show version
show clock
show history
3 commands were logged (buffer size is 10)
do
The do command in any configuration mode executes an EXEC-level command
from Global Configuration mode or any Configuration submode.
Syntax
do
command
Parameters
•
command
— The EXEC command to be executed.
Default Configuration
This command has no default configuration.
Command Mode
All Configuration modes
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
