Address Table Commands
show bridge address-table static
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 90
5
Parameters
•
vlan —
Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port.
•
port-channel-number —
A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
Console# show bridge address-table static
Aging time is 300 sec
vlan mac address port type
---- -------------------- -----------------
1 00:60:70:4C:73:FF e8 Permanent
1 00:60.70.8C.73:FF e8 delete-on-timeout
200 00:10:0D:48:37:FF e9 delete-on-reset
To Next Page
Loading...
