D-Link DES-1210-28/ME - Show Error Ports

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
95
Restrictions None.
Example usage:
To display the packets analysis for port 1:
DES-1210-28/ME:5# show packet ports 1
Command: show packet ports 1
Port Number : 1
Frame Size Frame Counts Frames/sec Frame Type Total Total/sec
---------------- -------------------- ----------------- ----------------- --------- ---------------
64 0 0 RX Bytes 0 0
65-127 0 0 RX Frames 0 0
128-255 0 0
256-511 0 0 TX Bytes 0 0
512-1023 0 0 TX Frames 0 0
1024-1518 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show error ports
Purpose To display the error statistics for a port or a range of ports.
Syntax
show error ports <portlist>
Description
The show error ports command displays all of the packet error
statistics collected and logged by the Switch for a given port list.
Parameters
<portlist> − A port or range of ports whose error statistics are to be
displayed.
Restrictions None.
Example usage:
To display the errors of port 2:
DES-1210-28/ME:5# show errors port 1
Command: show error ports 1
Port Number : 1
RX Frames TX Frames
----------------- -------------------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 8 Excessive Collision 0