D-Link DES-1210-28/ME - Show Cos Ip_Mapping; Delete Cos Ip_Mapping

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
135
IP mapping method on the Switch.
Parameters
<ipaddr> - Specifies the IP address to be mapped. For example,
10.90.90.99.
<class_id 0-3> - Specifies the number of the Switch’s hardware
priority queue.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the CoS IP mapping on the Switch:
DES-1210-28/ME:5# config cos ip_mapping destination_ip 10.0.0.56 class 1
Command: config cos ip_mapping destination_ip 10.0.0.56 class 1
Success!
DES-1210-28/ME:5#
show cos ip_mapping
Purpose To display the CoS IP mapping method.
Syntax
show cos ip_mapping {destination_ip <ipaddr>}
Description
The show cos ip_mapping command is used to display the CoS
MAC mapping method on the Switch.
Parameters
<ipaddr> - Specifies the IP address to be displayed. For example,
10.90.90.99.
Restrictions None.
Example usage:
To display the CoS ip mapping on the Switch:
DES-1210-28/ME:5# show cos ip_mapping
Command: show cos ip_mapping
IP ADDRESS Class
---------------------------------
10.0.0.56 1
DES-1210-28/ME:5#
delete cos ip_mapping
Purpose To remove the CoS IP mapping method.
Syntax
delete cos ip_mapping destination_ip <ipaddr>
Description
The delete cos ip_mapping command is used to delete the CoS IP
mapping method on the Switch.
Parameters
<ipaddr> - Specifies the IP address to be removed.
Restrictions Only administrator or operator-level users can issue this command.