D-Link DES-1210-28/ME - Show Stp

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
111
Description
The disable stp command sets the Spanning Tree Protocol to be
globally disabled on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable STP on the Switch:
DES-1210-28/ME:5# disable stp
Command: disable stp
Success.
DES-1210-28/ME:5#
show stp
Purpose To display the Switch’s current STP configuration.
Syntax
show stp
Description
The show stp command displays the Switch’s current STP
configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
STP Bridge Global Settings
------------------------------
STP Status : Enabled
STP Version : STP compatible
Bridge Priority : 32768
Max Age : 8
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 8
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:00:B2:FD:DA:EE:EB
DES-1210-28/ME:5#
Status 2: STP enabled for RSTP
STP Bridge Global Settings
------------------------------