D-Link DES-1210-28/ME - Create Snmp Host

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
62
Syntax
show snmp groups
Description
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch:
DES-1210-28/ME:5# show snmp groups
Command: show snmp groups
SNMP Group Table
Group Name Read View Write View Notify View Security Model Security Level
------------------ -------------- ---------------- --------------- ---------------------- -----------------
sg1 df df d v3 AuthPriv
ReadOnly ReadWrite --- ReadWrite v1 NoAuthNoPriv
ReadOnly ReadWrite --- ReadWrite v2c NoAuthNoPriv
ReadWrite ReadWrite ReadWrite ReadWrite v1 NoAuthNoPriv
ReadWrite ReadWrite ReadWrite ReadWrite v2c NoAuthNoPriv
Total Entries: 5
DES-1210-28/ME:5#
create snmp host
Purpose To create a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax
create snmp host <ipaddr> [v1 <username 32> | v2c <username
32> | v3 [noauth_nopriv | auth_nopriv | auth_priv] <username
32>]
Description
The create snmp host command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters
<ipaddr> − The IP address of the remote management station to
serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 is to be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c – Specifies that SNMP version 2c is to be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 is to be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
• Message integrity − ensures that packets have not been