D-Link DES-1210-28/ME - Disable Snmp Authenticate Trap; Show Snmp Traps

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
68
DES-1210-28/ME:5# enable snmp authenticate traps
Command: enable snmp authenticate traps
Success!
DES-1210-28/ME:5#
disable snmp authenticate trap
Purpose To disable SNMP authentication trap support.
Syntax
disable snmp authenticate trap
Description
The disable snmp authenticate trap command disables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To disable the SNMP authentication trap support:
DES-1210-28/ME:5# disable snmp authenticate traps
Command: disable snmp authenticate traps
Success!
DES-1210-28/ME:5#
show snmp traps
Purpose To display SNMP trap support status on the Switch.
Syntax
show snmp traps
Description
The show snmp traps command displays the SNMP trap support
status currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current SNMP trap support:
DES-1210-28/ME:5# show snmp traps
Command: show snmp traps
SNMP Traps : Disable
SNMP Authentication Traps : Disable
System Device Bootup : Disable
Fiber Port Link Up / Link Down : Disable
Twisted Pair Port Link Up / Link Down : Disable
RSTP Port State Change : Disable
Firmware Upgrade State : Disable
Port Security State : Disable