D-Link DES-1210-28/ME - Config Dhcp_Relay Delete Ipif System; Config Dhcp_Relay

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
84
config dhcp_relay delete ipif system
Purpose To delete a DHCP server from the DHCP Relay server list.
Syntax
config dhcp_relay delete ipif system <ipaddr>
Description
The config dhcp_relay delete ipif system command deletes a
DHCP servers defined as a DHCP Relay server.
Parameters
<ipaddr> − The IP address of the DHCP server.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To remove a DHCP server from the DHCP Relay server list:
DES-1210-28/ME:5# config dhcp_relay delete ipif System 10.6.150.49
Command: config dhcp_relay delete ipif System 10.6.150.49
Success!
DES-1210-28/ME:5#
config dhcp_relay
Purpose To delete a DHCP server from the DHCP Relay server list.
Syntax
config dhcp_relay hops <value 1-16>
Description
The config dhcp_relay hops command configures the
DHCP/BOOTP relay feature.
Parameters
hops <value 1-16> − Specifies the maximum number of relay agent
hops that the DHCP packets can cross.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To configure the DHCP relay on the Switch:
DES-1210-28/ME:5# config dhcp_relay hops 12
Command: config dhcp_relay hops 12
Success!
DES-1210-28/ME:5#