D-Link DES-1210-28/ME - Enable Snmp Fiber_Port_Link Traps; Disable Snmp Fiber_Port_Link Traps

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
72
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To disable SNMP IMPB violation traps support on the Switch:
DES-1210-28/ME:5# disable snmp IMPB_violation traps
Command: disable snmp IMPB_violation traps
Success!
DES-1210-28/ME:5#
enable snmp fiber_port_link traps
Purpose To enable SNMP fiber port link traps support on the Switch.
Syntax
enable snmp fiber_port_link traps
Description
The enable snmp fiber_port_link traps command enables SNMP
fiber port link traps support on the Switch. After enables the SNMP
fiber port link traps support, the Switch will send out a trap to the
SNMP manage host when the fiber port is link up or link down.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To enable SNMP fiber port link traps support on the Switch:
DES-1210-28/ME:5# enable snmp fiber_port_link traps
Command: enable snmp fiber_port_link traps
Success!
DES-1210-28/ME:5#
disable snmp fiber_port_link traps
Purpose To disable SNMP fiber port link traps.
Syntax
disable snmp fiber_port_link traps
Description
The disable snmp fiber_port_link traps command disables SNMP
fiber port link traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To disable SNMP fiber port link traps support on the Switch:
DES-1210-28/ME:5# disable snmp fiber_port_link traps
Command: disable snmp fiber_port_link traps