D-Link DES-1210-28/ME - Enable Snmp Traps; Disable Snmp Traps; Enable Snmp Authenticate Trap

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
67
enable snmp traps
Purpose To enable SNMP trap support.
Syntax
enable snmp traps
Description
The enable snmp traps command enables SNMP trap support on
the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To enable SNMP trap support on the Switch:
DES-1210-28/ME:5# enable snmp traps
Command: enable snmp traps
Success!
DES-1210-28/ME:5#
disable snmp traps
Purpose To disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description
The disable snmp traps command disables SNMP trap support on
the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To prevent SNMP traps from being sent from the Switch:
DES-1210-28/ME:5# disable snmp traps
Command: disable snmp traps
Success!
DES-1210-28/ME:5#
enable snmp authenticate trap
Purpose To enable SNMP authentication trap support.
Syntax
enable snmp authenticate trap
Description
The enable snmp authenticate trap command enables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To turn on SNMP authentication trap support: