DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
18
log – Used to save the current log to a file. The log file cannot be
deleted.
account – Used to save the account to a file.
Restrictions Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DES-1210-28/ME:5# save
Command: save
Building configuration ...
[OK]
DES-1210-28/ME:5#
reboot
Purpose To reboot the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
Syntax
reboot
Description
The reboot command restarts the Switch.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To restart the Switch:
DES-1210-28/ME:5# reboot
Command: reboot
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...
DES-1210-28/ME:5# System will Reboot....
Boot Procedure
--------------------------------------------------------------------------------
Please wait, loading Runtime image ........................ 100%
MAC Address : 00-B2-FD-DA-EE-EB
H/W Version :
F/W Version : 6.00.004
--------------------------------------------------------------------------------
DES-1210-28/ME Fast Ethernet Switch
Command Line Interface
To Next Page
Loading...
