D-Link DES-1210-28/ME - Config Ssh User; Show Ssh User Authmode

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
248
config ssh user
Purpose To specify which SSH public key is manually configured.
Syntax
config ssh user <string 15> authmode [hostbased hostname
<domain_name> hostname_IP <ipaddr> | password | publickey]
Description
The config ssh crypto command specifies which SSH public key is
manually configured.
Parameters
<string 15> – Specifies the name of SSH user.
hostabsed hostname <domain_name> – The username of the
remote SSH client.
[hostabsed | password | publickey] – Specifies which configuration
will be set on a SSH server for authentication.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the SSH user:
DES-1210-28/ME:5# config ssh user dlink authmode publickey
Command: config ssh user dlink authmode publickey
Success.
DES-1210-28/ME:5#
show ssh user authmode
Purpose To display the SSH public key stored on the device.
Syntax
show ssh user authmode
Description
The show ssh user authmode command displays the SSH user
stored on the device.
Parameters None.
Restrictions None.
Example usage:
To display the SSH public key on the device:
DES-1210-28/ME:5# show ssh user authmode
Command: show ssh user authmode
Account is empty!
Total Entries: 0
Success.
DES-1210-28/ME:5#