D-Link DES-1210-28/ME - Enable 802.1 X Server

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
200
DES-1210-28/ME:5# show igmp access_authentication ports 1-5
Command: show igmp access_authentication ports 1-5
Port Authentication State
------ ---------------------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
DES-1210-28/ME:5#
enable igmp_snooping
Purpose To enable IGMP snooping on the Switch.
Syntax
enable igmp_snooping {multicast_vlan}
Description
The enable igmp_snooping command enables IGMP snooping on
the Switch.
Parameters
{multicast_vlan} − Enables the multicast VLAN for IGMP Snooping
on the Switch.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable IGMP snooping on the Switch:
DES-1210-28/ME:5# enable igmp_snooping
Command: enable igmp_snooping
Success !
DES-1210-28/ME:5#
disable igmp_snooping
Purpose To disable IGMP snooping on the Switch.
Syntax
disable igmp_snooping {multicast_vlan}
Description
The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snooping can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
Parameters
{multicast_vlan} − Disables the multicast VLAN for IGMP Snooping
on the Switch.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
TTo disable IGMP snooping on the Switch:
DES-1210-28/ME:5# disable igmp_snooping
Command: disable igmp_snooping