DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
160
create vlan
Purpose To create a VLAN on the Switch.
Syntax
create vlan <string 20> {tag <int 2-4094> |
type_1q_vlan_advertisement}
Description
The create vlan command creates a VLAN on the Switch.
Parameters
<string 20> − The name of the VLAN to be created.
tag <int 2-4094> − The VLAN ID of the VLAN to be created. The
allowed values range from 2 to 4094.
type_1q_vlan_advertisement − Specifies the 1q vlan advertisement
on the Switch.
Restrictions Each VLAN name can be up to 32 characters. If the VLAN is not
given a tag, it will be a port-based VLAN.
Only administrator or operator-level users can issue this command.
Example usage:
To create a VLAN v1, tag 3:
DES-1210-28/ME:5# create vlan v1 tag 3
Command: create vlan v1 tag 3
Success
DES-1210-28/ME:5#
delete vlan
Purpose To delete a previously configured VLAN on the Switch.
Syntax
delete vlan [<vlan_name 20> | vlanid <int 2-4094>]
Description
The delete vlan command deletes a previously configured VLAN on
the Switch.
Parameters
<vlan_name 20> − The name of the VLAN to be deleted.
vlan_id <int 2-4092> − The VLAN of the VLAN to be deleted.
Restrictions Only administrator or operator-level users can issue this command.
A user is required to disable Guest VLAN before deleting a VLAN.
Example usage:
To remove a vlan which VLAN ID is 2:
DES-1210-28/ME:5# delete vlan vlanid 2
Command: delete vlan vlanid 2
Success
DES-1210-28/ME:5#
config vlan
Purpose To add additional ports to a previously configured VLAN and to
modify a VLAN name.
Syntax
config vlan [<vlan_name 20> | vlanid <vlanid 1-4094>] [[add
To Next Page
Loading...
