D-Link DES-1210-28/ME - Configure Link Aggregation

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
165
Global GVRP : Enable
Port PVID GVRP State Ingress Checking Acceptable Frame Type
---- ---- ---------- ----------------------- ---------------------------------
5 1 Enable Enable All Frames
6 1 Enable Enable All Frames
7 1 Enable Enable All Frames
8 1 Enable Enable All Frames
Total Entries : 4
DES-1210-28/ME:5#
show gvrp timer
Purpose To display the GVRP timer information on the Switch.
Syntax
show gvrp timer
Description
The show gvrp command displays the GVRP timer on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display GVRP timer information:
DES-1210-28/ME:5# show gvrp timer
Command: show gvrp timer
Garp Timer Info (in milli seconds)
---------------------------------------
Join-time Leave-time Leave-all-time
----------- ---------- --------------
100 600 10000
DES-1210-28/ME:5#
enable vlan_trunk
Purpose To enable VLAN trunking on the switch.
Syntax
enable vlan_trunk
Description
The enable vlan_trunk command, along with the disable
vlan_trunk command below, is used to enable and disable VLAN
trunking on the Switch, without changing the VLAN
trunking
configuration on the ports.
Parameters
None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage: