D-Link DES-1210-28/ME - LACP Commands; Configure LACP Port Priority

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
259
DES-1210-28/ME:5# delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-1210-28/ME:5#
show authen_enable
Purpose To display the list of authentication methods for promoting normal
user level privileges to Administrator level privileges on the Switch.
Syntax
show authen_enable [all | default | method_list_name <string
15>]
Description
The show authen_enable command deletes a user-defined list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters
default – Displays the default method list for users attempting to gain
access to Administrator level privileges on the Switch.
method_list_name <string 15> – The method_list_name to be
displayed.
all – Displays all the authentication login methods currently
configured on the Switch.
The command displays the following parameters:
• Method List Name – The name of a previously configured
method list name.
• Method Name – Defines which security protocols are
implemeted, per method list name.
Restrictions None.
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DES-1210-28/ME:5# show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
------------------------ -------- ------------------- ------------------
default 1 local Keyword
DES-1210-28/ME:5#
enable authen_policy
Purpose To enable the authentication policy on the Switch.
Syntax
enable authen_policy
Description
The enable authen_policy command enables the authentication
policy on the Switch.