D-Link DES-1210-28/ME - Show 802.1 X User; Delete 802.1 X User

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
224
DES-1210-28/ME:5# create 802.1x user dlink
Command: create 802.1x user dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success!
DES-1210-28/ME:5#
show 802.1x user
Purpose Displays the user information for the Guest VLAN.
Syntax
show 802.1x user
Description
The show 802.1x user command displays the 802.1x user
information on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the 802.1x user information:
DES-1210-28/ME:5# show 802.1x user
Command: show 802.1x user
Index Username
------------ ---------------
1 dlink
Total Entries: 1
Success!
DES-1210-28/ME:5#
delete 802.1x user
Purpose Deletes network access to a 802.1x user.
Syntax
delete 802.1x user <username 15>
Description
The delete 802.1x user command deletes network access to a
802.1x user.
Parameters
<vlanname 15> − The name of the 802.1x user to be deleted.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete the 802.1x user: