D-Link DES-1210-28/ME - Config Cos Tcp_Port_Mapping; Show Cos Tcp_Port_Mapping

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
141
6 0
7 0
DES-1210-28/ME:5#
config cos tcp_port_mapping
Purpose To configure the CoS TCP port mapping on the Switch.
Syntax
config cos tcp_port_mapping destination_port <value 0-65535>
class <class_id 0-3>
Description
The config cos tcp_port_mapping command is used to configure
the CoS TCP port mapping on the Switch.
Parameters
<value 0-65535> - Specifies the tcp port number to be mapped.
<class_id 0-3> - Specifies the number of the Switch’s hardware
priority queue.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the CoS TCP port mapping on the Switch:
DES-1210-28/ME:5# config cos tcp_port_mapping destination_port 500
class 1
Command: config cos tcp_port_mapping destination_port 500 class 1
Success!
DES-1210-28/ME:5#
show cos tcp_port_mapping
Purpose To displays the CoS TCP port mapping information on the Switch.
Syntax
show cos tcp_port_mapping {destination_port <value 0-65535>}
Description
The show cos tcp_port_mapping command is used to display the
CoS TCP port mapping information on the Switch.
Parameters
<value 0-65535> - Specifies the mapped tcp port information to be
displayed.
Restrictions None.
Example usage:
To display the CoS TCP port mapping on the Switch:
DES-1210-28/ME:5# show cos tcp_port_mapping
Command: show cos tcp_port_mapping
TCP Port Class
--------------------------------
500 1