D-Link DES-1210-28/ME - Disable Authen_Policy; Config Authen Application

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
260
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable the authentication policy:
DES-1210-28/ME:5# enable authen_policy
Command: enable authen_policy
Success.
DES-1210-28/ME:5#
disable authen_policy
Purpose To disable the authentication policy on the Switch.
Syntax
disable authen_policy
Description
The disable authen_policy command disables the authentication
policy on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable the authentication policy:
DES-1210-28/ME:5# disable authen_policy
Command: disable authen_policy
Success.
DES-1210-28/ME:5#
config authen application
Purpose To configure various applications on the Switch for authentication
using a previously configured method list.
Syntax
config authen application {console | http | ssh | all] [login |
enable] [default | method_list_name <string 15>]
Description
The config authen application command configures Switch
applications (console, Telnet, SSH) for login at the user level and at
the administration level (authen_enable), utilizing a previously
configured method list.
Parameters
application – Specifies the application to configure. One of the
following four options may be selected:
• console – Configures the command line interface login
method.
• http – Configures the http login method.
• ssh – Configures the Secure Shell login method.
• all – Configures all applications as (console, Telnet, SSH)