DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
13
DES-1210-28/ME:5# config account dlink
Enter a old password:****
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-1210-28/ME:5#
show account
Purpose To display information about all user accounts on the Switch.
Syntax
show account
Description
The show account command displays all account usernames and
their access levels created on the Switch. Up to 31 user accounts
can exist on the Switch at one time.
Parameters None.
Restrictions None.
Example usage:
To display the account which have been created:
DES-1210-28/ME:5# show account
Command: show account
Username Access Level
------------------ ------------
dlink Admin
Total Entries : 1
DES-1210-28/ME:5#
delete account
Purpose To delete an existing user account.
Syntax
delete account <username 15>
Description
The delete account command deletes a user account that has been
created using the create account command.
Parameters
<username 15> − the account username.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the user account ‘System’:
DES-1210-28/ME:5# delete account System
Command: delete account System
To Next Page
Loading...
