D-Link DES-1210-28/ME - Show Asymmetric_Vlan; Enable Management Vlan; Disable Management Vlan

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
168
Example usage:
To disable asymmetric_vlan on the switch:
DES-1210-28/ME:5# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success
DES-1210-28/ME:5#
show asymmetric_vlan
Purpose To display the Asymmetric VLAN status on the Switch.
Syntax
show asymmetric_vlan
Description
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
Parameters
None.
Restrictions None.
Example usage:
To display Asymmetric VLAN status:
DES-1210-28/ME:5# show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enable
DES-1210-28/ME:5#
enable management vlan
Purpose To enable the management VLAN on the Switch.
Syntax
enable management vlan
Description
The enable management vlan command enables the management
VLAN on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable management VLAN on the switch:
DES-1210-28/ME:5# enable management vlan
Command: enable management vlan
success
DES-1210-28/ME:5#
disable management vlan
Purpose To disable the management VLAN on the Switch.
Syntax
disable management vlan