D-Link DES-1210-28/ME - VLAN Commands

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
147
show scheduling_mechanism
Purpose To display the current traffic scheduling mechanisms in use on the
Switch.
Syntax
show scheduling_mechanism
Description
The show scheduling_mechanism command displays the current
traffic scheduling mechanisms in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the scheduling mechanism:
DES-1210-28/ME:5# show scheduling_mechanism
Command: show scheduling_mechanism
QOS Scheduling_mechanism
scheduling_mechanism : Strict Priority
DES-1210-28/ME:5#
config dscp mode
Purpose To enable setting the DSCP User Priority
Syntax
config dscp mode
Description
The config dscp mode command enables the DSCP mode on the
Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable the DSCP mode:
DES-1210-28/ME:5# config dscp mode
Command: config dscp mode
DSCP mode success!
Success
DES-1210-28/ME:5#
config dscp_mapping
Purpose To enable setting the DSCP User Priority
Syntax
config dscp_mapping dscp_value <value 0-63> class <class_id
0-3>
Description
The config dscp_mapping command enables mapping the DSCP