D-Link DES-1210-28/ME - Delete Authen Server_Host; Show Authen Server_Host

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
265
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To configure a TACACS+ authentication server host, with port number 4321, a timeout value of 12 seconds and a
retransmit count of 4.
DES-1210-28/ME:5# config authen server_host 10.1.1.121 protocol tacacs+ port
4321 timeout 12 retransmit 4
Command: config authen server_host 10.1.1.121 protocol tacacs+ port 4321
timeout 12 retransmit 4
Retransmit is meaningless for TACACS+.
Success.
DES-1210-28/ME:5#
delete authen server_host
Purpose To delete a user-defined authentication server host.
Syntax
delete authen server_host <ipaddr> protocol [tacacs+ | radius]
Description
The delete authen server_host command deletes a user-defined
authentication server host previously created on the Switch.
Parameters
server_host <ipaddr> - The IP address of the remote server host to
be deleted.
protocol – The protocol used by the server host the user wishes to
delete. The options are:
• tacacs+ – Specifies that the server host utilizes the
TACACS+ protocol.
• radius – Specifies that the server host utilizes the RADIUS
protocol.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete a user-defined RADIUS authentication server host:
DES-1210-28/ME:5# delete authen server_host 10.1.1.121 protocol radius
Command: delete authen server_host 10.1.1.121 protocol radius
Success.
DES-1210-28/ME:5#
show authen server_host
Purpose To view a user-defined authentication server host.
Syntax
show authen server_host
Description
The show authen server_host command displays user-defined