D-Link DES-1210-28/ME - Show Stp Instance

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
113
Restrictions None.
Example usage:
To show stp port 1 on switch one:
DES-1210-28/ME:5# show stp ports 1
Command: show stp ports 1
MSTP Port Information
--------- ---------------------
Port Index:1 , Port STP:Enabled , P2P:Auto ,
External PathCost : 19 , Edge Port:Auto ,
Port RestrictedRole:False , Port RestrictedTCN:False
Port Priority:128 , Port Forward BPDU:Enabled ,
MSTI Designated Bridge Internal PathCost Prio Status Role
------- -------------------------- ----------------------- ---- ---------- ----------
0 80:00:00:B2:FD:DA:EE:EB 200000 128 Disabled Disabled
DES-1210-28/ME:5#
show stp instance
Purpose To display the Switch’s STP instance configuration
Syntax
show stp instance {<value 0-15>}
Description
The show stp instance_id command displays the Switch’s current
STP Instance Settings and the STP Instance Operational Status.
Parameters
<value 0-15> - The value of the previously configured instance_id on
the Switch. The value may be between 0 and 15. An entry of 0
displays the STP configuration for the CIST internally set on the
Switch.
Restrictions None.
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-1210-28/ME:5# show stp instance 0
Command: show stp instance 0
## MST00
Bridge Address 00:b2:fd:da:ee:eb Priority 32768
Root Address 00:b2:fd:da:ee:eb Priority 32768
We are the Root for CST
Port 0 , path cost 0
IST Root Address 00:b2:fd:da:ee:eb Priority 32768
Path cost 0
Configured Forward delay 15, Max age 18, Max hops 20
Operational Forward delay 15, Max age 18
Interface Role Sts Cost Prio.Nbr Type