D-Link DES-1210-28/ME - Show Flood_Fdb; Clear Flood_Fdb; Show Multicast_Fdb; To Display;Clear Forwarding Database

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
121
show flood_fdb
Purpose To display the Switch’s forwarding database on the Switch.
Syntax
show flood_fdb
Description
The show flood_fdb command displays dynamically learned entries
from the Switch’s forwarding database.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To display FDB dynamic entries:
DES-1210-28/ME:5# show flood_fdb
Command: show flood_fdb
Flooding FDB State : Enabled
VID MAC Address Port
---- ----------------- ----
DES-1210-28/ME:5#
clear flood_fdb
Purpose To clear the Switch’s forwarding database of all dynamically learned
MAC addresses.
Syntax
clear flood_fdb
Description
The clear flood_fdb command clears dynamically learned entries
from the Switch’s forwarding database.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To clear all FDB dynamic entries:
DES-1210-28/ME:5# clear flood_fdb
Command: clear flood_fdb
Success.
DES-1210-28/ME:5#
show multicast_fdb
Purpose To display the contents of the Switch’s multicast forwarding
database.
Syntax
show multicast_fdb {vlan <vlan_name 32> | mac_address
<macaddr>}
Description
The show multicast_fdb command displays the current contents of
the Switch’s multicast MAC address forwarding database.