DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
202
show igmp_snooping group
Purpose To display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group [all | vlan_name <string 20> |
vlanid <vidlist>] {data_driven}
Description
The show igmp_snooping group command displays the current
IGMP snooping group configuration on the Switch.
Parameters
all − To display all IGMP snooping groups on the Switch.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping group configuration information is to be displayed. Up to
20 characters can be used.
vlanid <vidlist> − The ID of the VLAN for which IGMP snooping
group configuration infor mation is to be displayed.
{data_driven} − Specifies to display the data driven of IGMP
snooping group.
Restrictions None.
Example usage:
To show igmp snooping group:
DES-1210-28/ME:5# show igmp_snooping group vlan
default
Command: show igmp_snooping group vlan default
Total Entries : 0
DES-1210-28/ME:5#
Reports : 1
Port Member : 3,4
Total Entries : 1
DES-1210-28/ME:5#
show igmp_snooping forwarding
Purpose To display the IGMP snooping forwarding table entries on the
Switch.
Syntax
show igmp_snooping forwarding {vlan <vlan_name 20>}
Description
The show igmp_snooping forwarding command displays the
current IGMP snooping forwarding table entries currently configured
on the Switch.
Parameters
<vlan_name 20> − The name of the VLAN for which IGMP snooping
forwarding table information is to be displayed. Up to 32 characters
can be used.
Restrictions None.
Example usage:
To view the IGMP snooping forwarding table for VLAN ‘Trinity’:
DES-1210-28/ME:5# show igmp_snooping forwarding vlan default
To Next Page
Loading...
