D-Link DES-1210-28/ME - Configure Bandwidth Control

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
120
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete a permanent FDB entry:
DES-1210-28/ME:5# delete fdb default 00-00-00-00-01-02
Command: delete fdb default 00-00-00-00-01-02
Success
DES-1210-28/ME:5#
enable flood_fdb
Purpose To enable the Switch’s forwarding database on the Switch.
Syntax
enable flood_fdb
Description
The enable flood_fdb command enables dynamically learned
entries from the Switch’s forwarding database.34
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable FDB dynamic entries:
DES-1210-28/ME:5# enable flood_fdb
Command: enable flood_fdb
Success.
DES-1210-28/ME:5#
disable flood_fdb
Purpose To disable the Switch’s forwarding database on the Switch.
Syntax
disable flood_fdb
Description
The disable flood_fdb command disables dynamically learned
entries from the Switch’s forwarding database.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable FDB dynamic entries:
DES-1210-28/ME:5# disable flood_fdb
Command: disable flood_fdb
Success.
DES-1210-28/ME:5#