D-Link DES-1210-28/ME - Link Aggregation Commands; Create Link Aggregation Group

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
164
show vlan
Purpose To display the current VLAN configuration on the Switch
Syntax
show vlan {<int 1-4094>}
Description
The show vlan command displays summary information about each
VLAN including the VLAN ID, VLAN name, the Tagging/Untagging
status, and the Member/Non-member/Forbidden status of each port
that is a member of the VLAN.
Parameters
<int 1-4094> − Specify the VLAN id to be displayed.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DES-1210-28/ME:5# show vlan
Command: show vlan
VID : 1 VLAN NAME : default
VLAN Type : Static
VLAN Advertisement : Disabled
Member Ports : 1-28
Untagged Ports : 1-28
Forbidden Ports :
VID : 3 VLAN NAME : v1
VLAN Type : Static
VLAN Advertisement : Disabled
Member Ports :
Untagged Ports :
Forbidden Ports :
DES-1210-28/ME:5#
show gvrp
Purpose To display the GVRP status for a port list or port channel on the
Switch.
Syntax
show gvrp {<portlist>}
Description
The show gvrp command displays the GVRP status for a port list or
a port channel on the Switch.
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
Restrictions None.
Example usage:
To display GVRP port 5~8 status:
DES-1210-28/ME:5# show gvrp 5-8
Command: show gvrp 5-8