D-Link DES-1210-28/ME - IGMP Snooping Commands

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
178
Success.
DES-1210-28/ME:5#
show link_aggregation
Purpose To display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value 1-8> | algorithm}
Description
The show link_aggregation command displays the current link
aggregation configuration of the Switch.
Parameters
group_id <value 1-8> − Specifies the group ID. The Switch allows up
to 8 link aggregation groups to be configured. The group number
identifies each of the groups.
algorithm – shows which hash Algorithm is used for link aggregation
distribution.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
ES-1210-28/ME:5# show link_aggregation
Command: show link_aggregation
LA Module : Disable
DES-1210-28/ME:5#