D-Link DES-1210-28/ME - Show Greeting_Message

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
28
DES-1210-28/ME:5#
Command: config greeting_message
Greeting Messages Editor
===========================================================
DES-1210-28/ME Fast Ethernet Switch
Command Line Interface
Copyright(C) 2012 D-Link Corporation. All rights reserved.
============================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
show greeting_message
Purpose Used to view the currently configured greeting message configured
on the Switch.
Syntax
show greeting_message
Description
The show greeting_message command is used to view the
currently configured greeting message on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the currently configured greeting message:
DES-1210-28/ME:5# show greeting_message
Command: show greeting_message
DES-1210-28/ME Fast Ethernet Switch
Command Line Interface
Copyright(C) 2012 D-Link Corporation. All rights reserved.
DES-1210-28/ME:5#