D-Link DES-1210-28/ME - Show Cpu_Access_Profile

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
295
show cpu_access_profile
Purpose To view the CPU access profile entry currently set in the Switch.
Syntax
show cpu_access_profile {profile_id <value 1-3>}
Description
The show cpu access_profile command is used view the current
CPU interface filtering entries set on the Switch.
Parameters
profile_id <value 1-3> – Enter an integer between 1 and 3 that is
used to identify the CPU access profile to be deleted with this
command. This value is assigned to the access profile when it is
created with the create cpu access_profile command.
Restrictions None.
Example usage:
To show the CPU filtering state on the Switch:
DES-1210-28/ME:5# show cpu_access_profile
Command: show cpu_access_profile
Access Profile Table
Access Profile ID: 1 Type: Ethernet
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Mask Option:
VLAN
--------------------------------------------------------------------------
DES-1210-28/ME:5#