D-Link DES-1210-28/ME - Enable 802.1 X; Disable 802.1 X

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
212
Command Parameter
create 802.1x user <username 15>
show 802.1x user
delete 802.1x user <username 15>
config 802.1x capability
ports
[<portlist> | all] [authenticator | none]
Each command is listed in detail, as follows:
enable 802.1x
Purpose To enable the 802.1x server on the Switch.
Syntax
enable 802.1x
Description
The enable 802.1x command enables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DES-1210-28/ME:5# enable 802.1x
Command: enable 802.1x
Success!
DES-1210-28/ME:5#
disable 802.1x
Purpose To disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description
The disable 802.1x command disables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DES-1210-28/ME:5# disable 802.1x
Command: disable 802.1x
Success!
DES-1210-28/ME:5#