D-Link DES-1210-28/ME - Disable Vlan_Trunk; Show Vlan_Trunk

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
166
To enable vlan_trunk on the switch:
DES-1210-28/ME:5#enable vlan_trunk
Command: enable vlan_trunk
Success.
DES-1210-28/ME:5#
disable vlan_trunk
Purpose To disable VLAN Trunking on the switch.
Syntax
disable vlan_trunk
Description
The disable vlan_trunk command, along with the enable
vlan_trunk command below, is used to disable and enable VLAN
Trunking on the Switch, without changing the VLAN Trunking
configuration on the ports.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable vlan_trunk on the switch:
DES-1210-28/ME:5# disable vlan_trunk
Command: disable vlan_trunk
Success.
DES-1210-28/ME:5#
show vlan_trunk
Purpose To display the current VLAN Trunking configuration on the Switch
Syntax
show vlan_trunk
Description
The show vlan_trunk command displays summary information
about VLAN trunking status and configured ports.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To display the Switch’s current VLAN_trunk settings:
DES-1210-28/ME:5# show vlan_trunk
Command: show vlan_trunk
VLAN Trunk Status :Enable
Member Ports :None
DES-1210-28/ME:5#