D-Link DES-1210-28/ME - Create Auto_Fdb; Delete Auto_Fdb

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
124
3 Forward Unregistered Groups
4 Forward Unregistered Groups
5 Forward Unregistered Groups
6 Forward Unregistered Groups
7 Forward Unregistered Groups
8 Forward Unregistered Groups
9 Forward Unregistered Groups
10 Forward Unregistered Groups
11 Forward Unregistered Groups
12 Forward Unregistered Groups
13 Forward Unregistered Groups
14 Forward Unregistered Groups
15 Forward Unregistered Groups
16 Forward Unregistered Groups
17 Forward Unregistered Groups
18 Forward Unregistered Groups
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
create auto_fdb
Purpose To create a static entry in the auto forwarding table (database).
Syntax
create auto_fdb <ipaddr>
Description
The create auto_fdb command creates a static entry in the
multicast MAC address forwarding table (database).
Parameters
<ipaddr> − The IP address to be added to the auto forwarding table.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To create auto forwarding table:
DES-1210-28/ME:5# create auto_fdb 172.21.47.13
Command: create auto_fdb 172.21.47.13
Success.
DES-1210-28/ME:5#
delete auto_fdb
Purpose To delete a static entry in the auto forwarding table (database).
Syntax
delete auto_fdb <ipaddr>
Description
The delete auto_fdb command removes a static entry in the
multicast MAC address forwarding table (database).
Parameters
<ipaddr> − The IP address to be deleted from the auto forwarding
table.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete auto forwarding table: