D-Link DES-1210-28/ME - Enable Snmp Twistedpair_Port_Link Traps; Disable Snmp Twistedpair_Port_Link Traps

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
77
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP system device bootup traps on the Switch:
DES-1210-28/ME:5# disable snmp system_device_bootup traps
Command: disable snmp system_device_bootup traps
Success!
DES-1210-28/ME:5#
enable snmp twistedpair_port_link traps
Purpose To enable SNMP twisted pair ports link traps support on the Switch.
Syntax
enable snmp twistedpair_port_link traps
Description
The enable snmp twistedpair_port_link traps command enables
SNMP twisted pair ports link traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable the SNMP twisted pair ports link traps on the Switch:
DES-1210-28/ME:5# enable snmp twistedpair_port_link traps
Command: enable snmp twistedpair_port_link traps
Success!
DES-1210-28/ME:5#
disable snmp twistedpair_port_link traps
Purpose To disable SNMP twisted pair ports link traps support on the Switch.
Syntax
disable snmp twistedpair_port_link traps
Description
The disable snmp twistedpair_port_link traps command enables
SNMP twisted pair ports link traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP twisted pair ports link traps on the Switch:
DES-1210-28/ME:5# disable snmp twistedpair_port_link traps
Command: disable snmp twistedpair_port_link traps