D-Link DES-1210-28/ME - Show Fdb

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
122
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the MAC
address resides.
mac_address <macaddr> − The MAC address that will be added to
the forwarding table.
Restrictions None.
Example usage:
To display multicast MAC address table:
DES-1210-28/ME:5# show multicast_fdb
Command: show multicast_fdb
Static Multicast Table
----------------------
Total Mac Addresses displayed: 0
DES-1210-28/ME:5#
show fdb
Purpose To display the current unicast MAC address forwarding database.
Syntax
show fdb {port <port 1-28> | vlan <vlan_name 32> |
mac_address <macaddr> | static | aging_time}
Description
The show fdb command displays the current contents of the
Switch’s forwarding database.
Parameters
<port 1-28> − The port number corresponding to the MAC
destination address. The Switch always forwards traffic to the
specified device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address entry in the forwarding table.
static − Specifies that static MAC address entries are to be
displayed.
aging_time − Displays the aging time for the MAC address
forwarding database.
Restrictions None.
Example usage:
To display unicast MAC address table:
DES-1210-28/ME:5# show fdb port 3
Command: show fdb port 3
VID VLAN Name MAC Address Port Type
---- -------------------------------- -------------------------- ---------------
1 default 00-00-01-01-02-03 3 Permanent
Total Entries : 1