D-Link DES-1210-28/ME - Show Cos Mac_Mapping; Delete Cos Mac_Mapping; Config Cos Ip_Mapping

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
134
show cos mac_mapping
Purpose To display the CoS MAC mapping method.
Syntax
show cos mac_mapping {destination_addr <macaddr>}
Description
The show cos mac_mapping command is used to display the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions None.
Example usage:
To display the CoS mac mapping on the Switch:
DES-1210-28/ME:5# show cos mac_mapping
Command: show cos mac_mapping
MAC ADDRESS Class
----------------------------------
00-01-C2-11-22-33 2
DES-1210-28/ME:5#
delete cos mac_mapping
Purpose To remove the CoS MAC mapping method.
Syntax
delete cos mac_mapping destination_addr <macaddr>
Description
The delete cos mac_mapping command is used to delete the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS mac mapping on the Switch:
DES-1210-28/ME:5# delete cos mac_mapping destination_addr 00-01-c2-
11-22-33
Command: delete cos mac_mapping destination_addr 00-01-c2-11-22-33
Success!
DES-1210-28/ME:5#
config cos ip_mapping
Purpose To configure the CoS IP mapping method.
Syntax
config cos ip_mapping destination_ip <ipaddr> class <class_id
0-3>
Description
The config cos ip_mapping command is used to configure the CoS