D-Link DES-1210-28/ME - Config 802.1 X Capability Ports

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
225
DES-1210-28/ME:5# delete 802.1x user dlink
Command: delete 802.1x user dlink
Success!
DES-1210-28/ME:5#
config 802.1x capability ports
Purpose Defines a port or range of ports to be members of the Guest VLAN.
Syntax
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
Description
Th config 802.1x capability ports is used to configure the
capability for the 802.1x on the Switch.
Parameters
<portlist> – A port or range of ports to be configured to the 802.1x
capability.
All – Indicates all ports to be configured to the 802.1x capability.
[authenticator | none] – Specifies the 802.1x capability port to be
authenticator or none.
Restrictions Only Administrator or operator–level users can issue this command.
Example usage:
To configure capability ports to the 802.1x on the Switch:
DES-1210-28/ME:5# config 802.1x capability ports all authenticator
Command: config 802.1x capability ports all authenticator
Success!
DES-1210-28/ME:5#