D-Link DES-1210-28/ME - Delete Cpu_Access_Profile

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
294
port in their header.
• flag <string> – Specifies the appropriate flag parameter.
• src_port <value 0-65535> –Specifies that the cpu access
profile applies only to packets that have this TCP source
port in their header.
udp – Specifies that the Switch examines each frame’s protocol
field and it’s value must be 17 (User Datagram Protocol-UDP) in
order for the action to take place.
• dst_port <value 0-65535> – Specifies that the CPU access
profile applies only to packets that have this UDP
destination port in their header.
src_port <value 0-65535> – Specifies that the CPU access profile
applies only to packets that have this UDP source port in their
header.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To configure a rule for the CPU IP access profile:
DES-1210-28/ME:5# config cpu access_profile profile_id 2 add access_id
auto_assignip destination_ip 10.48.100.2 ports 1-3 permit
Command: config cpu access_profile profile_id 2 add access_id auto_assign
ip destination_ip 10.48.100.2 ports 1-3 permit
Success.
DES-1210-28/ME:5#
delete cpu_access_profile
Purpose To delete a previously created cpu access profile.
Syntax
delete cpu_access_profile profile_id <value 1-3>
Description
The delete cpu_access_profile command deletes a previously
created access profile on the Switch.
Parameters
profile_id <value 1-3> – Specifies the cpu access profile to be
deleted.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-1210-28/ME:5# delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-1210-28/ME:5#