D-Link DES-1210-28/ME - Show Stp Ports

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
112
STP Status : Enabled
STP Version : RSTP
Bridge Priority : 32768
Max Age : 8
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 8
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:00:B2:FD:DA:EE:EB
DES-1210-28/ME:5#
Status 3: STP enabled for MSTP
STP Bridge Global Settings
------------------------------
STP Status : Enabled
STP Version : MSTP
Bridge Priority : 32768
Max Age : 8
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 8
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:00:B2:FD:DA:EE:EB
DES-1210-28/ME:5#
show stp ports
Purpose To display the Switch’s current instance_id configuration.
Syntax
show stp ports {<portlist>}
Description
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
Parameters
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash.