D-Link DES-1210-28/ME - Show Ipif

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
180
show ipif
Purpose To display the configuration of an IP interface on the Switch.
Syntax
show ipif
Description
The show ipif command displays the configuration of an IP interface
on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display IP interface settings:
DES-1210-28/ME:5# show ipif
Command: show ipif
IP Setting Mode : DHCP
IP Address : 0.0.0.0
Subnet Mask : 0.0.0.0
Default Gateway : 0.0.0.0
DHCP Option12 State : Disabled
DHCP Option12 Host Name : DES-1210-28/ME
DES-1210-28/ME:5#