D-Link DES-1210-28/ME - Show Port_Security

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
227
To configure port security:
DES-1210-28/ME:5# config port_security 1-5 admin_state enable
max_learning_addr 5 lock_address_mode DeleteOnReset
Command: config port_security 1-5 admin_state enable
max_learning_addr 5 lock_ad
dress_mode DeleteOnReset
Success
DES-1210-28/ME:5#
show port_security
Purpose
To display the current port security configuration.
Syntax show port_security {ports <portlist>}
Description The show port_security command displays port security
information for the Switch’s ports. The information displayed
includes port security, admin state, maximum number of learning
address and lock mode and trap interval.
Parameters ports <portlist> – A port or range of ports whose settings are to be
displayed.
Restrictions
None.
Example usage:
To display the port security configuration:
DES-1210-28/ME:5# show port_security ports 1-5
Command: show port_security ports 1-5
Port Admin state Max.Learning Addr. Lock Address Mode
---- ------------- -------------------------- -------------------
1 enabled 5 DeleteOnReset
2 enabled 5 DeleteOnReset
3 enabled 5 DeleteOnReset
4 enabled 5 DeleteOnReset
5 enabled 5 DeleteOnReset
DES-1210-28/ME:5#