D-Link DES-1210-28/ME - Create Account

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
11
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable password encryption on the Switch:
DES-1210-28/ME:5# enable password encryption
Command: enable password encryption
Success.
DES-1210-28/ME:5#
disable password encryption
Purpose Used to disable password encryption on a user account.
Syntax
disable password encryption
Description The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters None.
Restrictions Only Administrat level users can issue this command.
Example usage:
To disable password encryption on the Switch:
DES-1210-28/ME:5# disable password encryption
Command: disable password encryption
Success.
DES-1210-28/ME:5#
create account
Purpose To create user accounts.
Syntax
create account [admin | operator | user] <username 15>
Description
The create account command creates an administrator, operator,
or user account that consists of a username and an optional