D-Link DES-1210-28/ME - Show Ssl; Download Ssl Certificate

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
250
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable the SSL status on the Switch:
DES-1210-28/ME:5# disable ssl
Command: disable ssl
Success.
DES-1210-28/ME:5#
show ssl
Purpose To view the SSL status and the certificate file status on the Switch
Syntax
show ssl
Description
The show ssl command displays the SSL status and the certificate
file status on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the SSL status on the Switch:
DES-1210-28/ME:5# show ssl
Command: show ssl
SSL Status Enabled
RSA-NULL-MD5 0x0001 Enabled
RSA-NULL-SHA1 0x0002 Enabled
RSA-DES-SHA1 0x0004 Enabled
RSA-3DES-SHA1 0x0008 Enabled
DH-RSA-DES-SHA1 0x0010 Enabled
DH-RSA-3DES-SHA1 0x0020 Enabled
RSA-EXP1024-DES-SHA1 0x0040 Enabled
Success.
DES-1210-28/ME:5#
download ssl certificate
Purpose To download ssl certificate file on the Switch.
Syntax
download ssl certificate <ipaddr> certfilename <path_filename
64>
Description
The download ssl certificate command downloads the SSL file on
the Switch.
Parameters
<ipaddr> – Specifies the IP address of SSL file.