D-Link DES-1210-28/ME - BPDU Attack Protection Commands; Configure BPDU Protection Ports

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
169
Description
The disable management vlan command disables the
management VLAN on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable management VLAN on the switch:
DES-1210-28/ME:5# disable management vlan
Command: disable management vlan
success
DES-1210-28/ME:5#
config management vlan
Purpose To configure the management VLAN on the Switch.
Syntax
config management vlan <string 32>
Description
The config management vlan command configures the
management VLAN on the Switch.
Parameters
<string 32> − Specifies the management VLAN name on the Switch.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the management VLAN on the switch:
DES-1210-28/ME:5# config management vlan default
Command: config management vlan default
success
DES-1210-28/ME:5#
show management vlan
Purpose To display the management VLAN on the Switch.
Syntax
show management vlan
Description
The show management vlan command displays the management
VLAN information on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the management VLAN on the switch:
DES-1210-28/ME:5# show management vlan
Command: show management vlan