DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
235
show ArpSpoofing
Purpose To display the ARP Spoofing information on the Switch.
Syntax
show ArpSpoofing
Description
The show ArpSpoofing displays the information, indludes IP
address, MAC address and Port list information on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the ARP Spoofing information on the Switch:
DES-1210-28/ME:5# show ArpSpoofing
Command: show ArpSpoofing
IP Address MAC Address PortList
10.2.1.1 00:00:00:01:01:02 1-28
DES-1210-28/ME:5# show ArpSpoofing
delete ArpSpoofing
Purpose To delete an IP address and the corresponding MAC address into
the Switch’s ARP table.
Syntax
delete ArpSpoofing ip_address <ip_addr>
Description
The delete ArpSpoofing command deletes an IP address and the
corresponding MAC address into the Switch’s ARP table.
Parameters
ip_address <ipaddr> − The IP address of the end node or station.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete the ARP spoofing configuration:
DES-1210-
To Next Page
Loading...
